AIRLESSCO SP200 - Manual (Page 19)

Shutdown and Cleaning
3A0994E 19
NOTE: Step 12 is for returning paint in hose back to
paint pail. One 50-ft hose holds approximately 1-quart
(1-liter) of paint.
12. To preserve paint
in hose:
a. Point gun into
paint pail.
b. Unlock gun
trigger lock.
c. Pull and hold
gun trigger.
d. Turn
Prime/Spray
valve to
SPRAY.
e. Turn power
switch ON.
f. Continue to hold gun trigger until you see paint
diluted with flushing fluid starting to come out of
gun.
13. While continuing to trigger
gun, quickly move gun to
redirect spray into waste
pail. Continue triggering gun
into waste pail until flushing
fluid dispensed from gun is
relatively clear.
14. Stop triggering
gun. Engage the
trigger lock.
15. Turn prime/spray
valve to Prime.
16. Turn power switch
OFF.
17. Clean InstaClean Fluid Filter and gun, page 22.
18. Fill unit with PumpLife storage fluid. Read Long
Term Storage, page 23.
o preserve paint in hose, trigger gun into paint pail
to expel the remaining paint.
ti9345a
ti5580a
(Mustang 2)
ti15979a
(ASM 500)
ti15980a
ti9745a
( ASM 500 )
ti15978a
( Mustang 2 )
ti15981a
ti9346a
ti2018a