AIRLESSCO SP200 - Manual (Page 21)

Shutdown and Cleaning
3A0994E 21
NOTE: Step 16 is for returning paint in hose back to
paint pail. One 50-ft (15-m) hose holds approximately
1-quart (1-liter) of paint.
16. To preserve paint
in hose:
a. Point gun into
paint pail.
b. Unlock gun
trigger lock.
c. Pull and hold
gun trigger.
d. Turn
Prime/Spray
valve to
SPRAY.
e. Turn power
switch ON.
f. Continue to hold gun trigger until you see paint
diluted with water starting to come out of gun.
17. While continuing to trigger
gun, quickly move gun to
redirect spray into waste
pail. Continue triggering
gun into waste pail until
water coming out of gun is
relatively clear.
18. Stop triggering
gun. Engage
trigger lock.
19. Turn prime/spray valve to
Prime.
20. Turn power switch OFF.
21. Turn off garden hose. Close
Power Flush attachment.
22. Unscrew Power Flush attachment
from suction tube.
23. Clean InstaClean Fluid Filter and
gun, page 22.
24. Fill unit with PumpLife storage fluid. Read Long
Term Storage, page 23.
ti9345a
ti5580a
(Mustang 2)
ti15979a
(ASM 500)
ti15980a
ti9745a
ti15981a ti15978a
( Mustang 2 ) ( ASM 500 )
ti9346a
ti2810a
ti9413a
ti2047a