Extron Electronics Extender Series - Manual (Page 32)

Reference
Extender Series • Reference
PRELIMINAR
Y
A-2
Specifications
Video
Gain ................................................. 0 dB, 0.6 dB, 1.2 dB, selectable (when
input is 0.7 Vp-p, output is 0.7 V, 0.75 V,
0.8 Vp-p)
Bandwidth ...................................... 300 MHz (-3 dB)
N ID bits are terminated (pins 4 and 11).
Video input
Number/signal type ..................... 1 VGA–QXGA RGBHV, RGBS, RGsB,
RsGsBs, HDTV component video
Connectors ..................................... (1) 15-pin HD female
Nominal level ................................ 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of
component video
Minimum/maximum levels ........ Analog: 0.3 V to 1.5 Vp-p with no offset at
unity gain
Impedance ...................................... 75 ohms
Horizontal frequency .................... 15 kHz to 135 kHz
Vertical frequency .......................... 30 Hz to 170 Hz
Input coupling ............................... DC
Video output
Number/signal type ..................... 1 VGA–QXGA RGBHV, RGBS, RGsB,
RsGsBs, HDTV component video
Connectors
Extender AAP EX .............. 5 BNC female on 18" (HV) and 20" (RGB)
pigtails
All other models ................ 5 BNC female on 3" pigtails
Nominal level ................................ 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of
component video
Minimum/maximum levels ........ Analog: 0.3 V to 1.5 Vp-p with no offset at
unity gain
Impedance ...................................... 75 ohms
DC offset ......................................... ±5 mV with input at 0 offset
Return loss ...................................... <-35 dB @ 5 MHz