Extron Electronics Extender Series - Manual (Page 24)

Extender Series • Installation
Installation, cont’d
2-14
PRELIMINAR
Y Mounting the Extenders
Mounting the Extender AAP or Extender AAP EX
into an AAP wall plate or device faceplate
The Extender AAP or Extender AAP EX and any other adapter
plates must be attached to a device faceplate or AAP wall
plate and cabled before the device or wall plate is pretested or
installed in a wall or furniture.
1
. Before any user-supplied cables are attached, insert
the Extender AAP or Extender AAP EX’s output BNC
connectors and wires through the opening in the front of
the wall plate or device faceplate.
2 . Insert the AAP’s threaded standoffs through the holes in
the device’s faceplate or AAP wall plate.
3 . Using the provided #4-40 nuts and captive washers, secure
the Extender to the faceplate/wall plate.
Installation Cable
Cable
Clamp
Screws or Nails
Wall Stud
#4-40 Nut w/ Captive
Washer
Extr
on
Extender AAP AAP 102
AAP 102
EXTENDER
COMPUTER IN
AUDIO IN
Mounting the Extender AAP or Extender AAP EX to a
device or wall plate