Allmand Brothers I HYDRAULIC - Manual (Page 2)

2
INSPECTION CHECK LIST
FOR PREPARING THE MAXI LITE FOR DELIVERY OR RENTAL
The MAXI LITE requires service as well as proper operation in order to provide the perfor-
mance and safety it has been designed for. Never deliver or put a machine into service with
known defects or missing instructions or decals. Always instruct the customer in the proper
operation and safety procedures as described in the operator’s manual. Always provide the
manual with the equipment for proper and safe operation.
CHECK LIST:
ƒ
Visually inspect the equipment to ensure that all instructions and decals are in place and
legible.
ƒ Inspect the tower latch and knob assembly which locks the tower in the vertical position for
proper operation.
ƒ Check the hitch assembly and safety tow chains.
ƒ Check the outriggers and jacks to make sure they operate properly.
ƒ Inspect the light assemblies for damage and test for proper operation.
ƒ Inspect the electrical wiring for signs of damage.
ƒ Check the ground rod cable and the ground lug. Make sure they are clean, undamaged,
and functional.
ƒ Inspect the tires to ensure good condition and proper inflation.
ƒ Check oil, fuel, coolant levels, and hydraulic fluid levels.
ƒ Check to make sure the operator’s manual is with the equipment.
ƒ Inspect the machine physically for damage and repair if necessary.
NOTE: See appropriate section of manual for scheduled maintenance intervals.
After completing the inspection check list, operate the tower through a complete
operation cycle, following the operating instructions in the operator’s manual.
!
WARNING
NEVER ALLOW ANYONE TO OPERATE THE EQUIPMENT WITHOUT
PROPER TRAINING!
ALWAYS READ THE INSTRUCTIONS FIRST!