Allmand Brothers I HYDRAULIC - Manual (Page 21)

21
CONTROLS AND COMPONENTS
NOTE:
COMPONENTS SHOWN ARE STANDARD. PICTURES MAY VARY WITH DIFFERENT OPTIONS.
FIG. 14 KICKOUT SPRING
41. Kickout Spring—Tilts mast off
center when folding mast down
NOTE: Tower must be positioned with the
two black triangles on the tower assembly,
near the mast handles, pointing at each other.
Then the locking bar can be released from
the strike plate allowing the tower to rotate
toward horizontal towing position.
FIG. 15 TOWER LOCKING BAR LATCH
42. Mast Locking Bar Latch — Locks mast in
vertical position and allows tower to
rotate.
43. Mast Locking Bar Safety Switch —
Prevents extension of mast when
locking bar is not engaged.