Allmand Brothers ML6-8 LD - Manual (Page 21)

21
CONTROLS AND COMPONENTS
NOTE:
COMPONENTS SHOWN ARE STANDARD. PICTURES MAY VARY WITH DIFFERENT OPTIONS.
FIG. 8 REAR JACK
28. RearJack
FIG. 9 OUTRIGGER JACK
29. Pin--Retains outrigger in retracted
position for towing
30. Jack Pin--Pull to allow jack to rotate
31. Outrigger Jack
32 Jack Handle--Crank handle to raise and
lower foot of jack to level trailer.
FIG. 10 REAR TOWER SUPPORT
33. Pin—Locks tower into rear tower support
34. Rear Tower Support
!
SAFETY WARNING
WHEN EXTENDING REAR JACK,
WATCH TO INSURE YOU ARE
CLEAR OF THE OVERHANGING
ENDS OF THE MAST BEFORE