Amer Networks MR16 - Manual (Page 13)

9
.Installing Media Converter
The chassis is equipped with sixteen media converter carriers, each of
which is fitted into bays of the chassis.
Step 1: To install a media converter module onto the chassis, you have to
unscrew the bay cover from the desired bay first.
Step 2: Unscrew the hand screw counter clockwise by using hand or
screwdriver and pull out the media converter out the carrier as
shown below.
Unscrew the hand screw counter clockwise
by using hand or screwdriver and pull the
media converter module out on the carrier
Step 3: Carefully slide in the module and fasten the hand screw
clockwise by using hand or screwdriver until it is fully and firmly
fitted into the slot of the chassis.
Insert the media converter module
into an available slot and fasten the hand
screw clockwise by using hand or screwdriver.