ARAG Navigator LT - Manual (Page 4)

4
1 RISKS AND PROTECTIONS BEFORE ASSEMBLY
All installation works must be done with battery disconnected, using suitable tools and any individual protection equipment
deemed necessary.
Use ONLY clean water for treatment tests and simulations: using chemicals during simulated treatment runs can seriously injure
persons in the vicinity.
2 INTENDED USE
The device is a satellite navigator that – through the external GPS receiver – can be used for agricultural applications and navigation.
IMPORTANT:
NAVIGATOR is a GPS GUIDANCE MONITOR, it does not control the status of each section: any intervention on the valves must
be made separately, by consulting the instruction manual of the relevant control.
By communicating what happens on the field, Navigator will collect data on the job.
Navigator is not designed for use on public roads and should only be used on farmland.
This device is designed to work on agricultural machinery for spraying and crop spraying applications.
The machine is designed and built in compliance with ISO 14982 standard (Electromagnetic compatibility - Forestry and farming
machines), harmonized with 2004/108/EC Directive.
3 PRECAUTIONS
• Do not aim water jets at the equipment.
• Do not use solvents or fuel to clean the case outer surface.
• Do not clean equipment with direct water jets.
• Comply with the specified power voltage (12 VDC).
• In case of voltaic arc welding, remove connectors from Navigator and disconnect the power cables.
• Only use ARAG genuine spare parts and accessories.
4 PACKAGE CONTENT
The table below indicates the components that you will find in the Navigator package:
Fig. 1
Legend:
1 Navigator
2 Instruction manual (CD-ROM)
3 Fixing kit
4 Power cable
INTRODUCTION