ARAG BRAVO 300S / Orchard sprayer Direct connection Installation - Software ver. 3.x User Manual
Page 8
8
6.3
Bracket fixing
The monitor must be mounted after having fixed the bracket at the desired location (the previous
paragraph shows the bracket drilling template).
The bracket must be slid out of the monitor seat (
a
, Fig. 5) and fixed using the supplied screws (
b
).
Make sure the bracket is securely mounted, fit the monitor on it, and push it until it locks in place (
c
).
6.4
Control unit position
The control unit must be fixed with the special brackets supplied and fitted to the unit, positioning it
as shown in the manual provided with the assembly.
MAKE SURE TO FOLLOW ALL THE SAFETY INSTRUCTIONS GIVEN IN THE CON-
TROL UNIT’S MANUAL.
7
coMputer connection to the farMing Machine
7.1
General precautions for a correct harness position
• Securing the cables:
- secure the harness so that it does not interfere with moving parts;
- route the harnesses in such a way that they cannot come into contact with moving parts.
• Routing the cables to protect against water infiltrations:
- the cable branches must ALWAYS face downwards (Fig. 6a).
Fig. 6a
Fig. 6b
CONTINUES
Fig. 5