Ericsson GH388/GF388 - Manual (Page 37)

Advanced Functions
18. Rejecting Incoming Calls
Sometimes, it may be inconvenient to answer
an incoming call.
To reject a call, press
E
, and the message
Busy Tone appears in the display. If the caller’s
network supports it, the caller will hear an en-
gaged (busy) tone.
You can activate Divert On Busy (see DIVERT
menu) to automatically divert rejected calls to
another phone number, for example your
answering service. The message Diverted
appears on the display to indicate that a
rejected call is diverted.
If you receive a second call while you are
engaged in another call, you must press 0,
followed by
S
, to reject it (refer To receive a
second call while engaged in a call in chapter
20).
19. Putting a Call on Hold
If you are engaged in a call, you can put it on
hold by pressing
S
. This disconnects the
microphone so you can have a private
conversation without the person at the other
end hearing. Press
S
again, to take the call
off hold.
You can also put a call on hold to make
another call, or to accept a waiting call, as
described in chapter 20.
20. Handling Two Calls Simultaneously
This service may not be available on all
networks. In addition, a special subscription
may be required to use the service.
The phone allows you to handle two calls
simultaneously. This means that you may hold a
call in progress and make a second call, and
then switch between them.
You may also hold a call in progress and
answer a second call, and switch between the
two. However, to receive a second call, you
need to activate the Call Waiting function.
The descriptions below assume that the Call
Waiting function is activated.
To activate, review status, or cancel
Call Waiting function
1. Access the Call Waiting function from the
Access menu.
ACCESS
~ Call 
Waiting
2. Press YES to select it.
3. Using the arrow keys, you can now scroll
between three options: Activate, Get
status or Cancel.
4. Press YES to select the desired option.
CALL WAITING
~ Activate 
EN/LZT 126 1298 R1A 37