ATL Telecom Berkshire 800 - Manual (Page 15)

HR : MIN DAY / MONTH
02920790152
NEW CALL
INDICACTOR
REPEAT CALL
INDICATOR
NEW CALL
REP 27
CALL ANSWERED
27th ENTRY
IN CALLS LOG
NAME ONLY
PROVIDED IF THE
NUMBER CALLING &
ASSOCIATED NAME
HAVE PREVIOUSLY
BEEN STORED IN
THE TELEPHONES'
MEMORIES
Call Waiting CLI
When off hook the Berkshire 800 allows you to
receive a second call. Normally the caller receives
the “ENGAGED” tone and must re-dial. With your
Berkshire 800, the LCD will display that you have a
new call and you have the option of interrupting the
initial call to take the new call and then return to the
initial call.
When a new call arrives, a tone will be heard, the
LCD will display the “CALL WAITING” symbol “CW”
and the caller information.
HR : MIN DAY / MONTH
02920790152
CALL INDICATOR CALL
06
6th ENTRY IN
CALLS LOG CALLER
INFORMATION
INITIAL CALL
ANSWERED
CW CALL WAITING
To take the new call, (Whilst NOT disconnecting
with the fi rst call) press the “TRANSFER” key.
The LCD will display the “TRANSFER” symbol “R”
and the call will be transferred to the new caller:
HR : MIN DAY / MONTH
R
00 - 00 - 03
SINGLE PRESS OF
THE TRANSFER KEY
CALL TIME
Press the “TRANSFER” key a second time to return
to the initial caller.
Continue pressing the “TRANSFER” key to toggle
between the two callers.
To end one of the calls, just hang up on that caller
and the telephone will ring you back to connect you
with the remaining caller.
Alternating between
Handset, Headset &
Handsfree
If a headset is plugged into the telephone, the
“HANDSFREE” operation will NOT be available.
HANDSET TO HEADSET
If the HEADSET facility is required, a compatible
headset must be plugged into the “HEADSET”
socket on the left hand side of the telephone.
If you have taken a call on the handset and wish to
transfer it to the headset:
Press the “HEADSET/DIAL” key. The LED on the
“HEADSET DIAL” key will fl ash and “REPLACE
HANDSET” will be displayed.
Replace the handset. The LED on the “HEADSET/
DIAL” key will stop fl ashing and the call will be
transferred to the headset. The LCD will display the
following:
HR : MIN DAY / MONTH
HEADSET MODE
00 - 01 -15 CALL DURATION
TELEPHONE NOW
IN HEADSET MODE
The caller information on the LCD will be replaced
by the call time duration.
HANDSET TO HANDSFREE
If a headset is plugged into the telephone, the
“HANDSFREE” operation will NOT be available.
If you have taken a call on the handset and wish to
transfer it to handsfree:
Press the “HEADSET/DIAL” key. The LED on the
“HEADSET/DIAL” key will fl ash and the display will
display “REPLACE HANDSET”.
Replace the handset. The LED on the “HEADSET/
DIAL” key will stop fl ashing and call will be transferred
to the handsfree feature of the Berkshire 800. The
LCD will display the following:
HR : MIN DAY / MONTH
SPEAKER VOLUME: 5
Press the “HEADSET/DIAL” key. The LED on the
“HEADSET/DIAL” key will go off and the display will
show the “On-hook” screen. The latest setting for
the speaker volume will be retained for the next time
the telephone is used in handsfree mode.
The Speaker Volume can be adjusted during
a “HANDSFREE” telephone call. This may be
particularly useful if the telephone is being used to
make a conference call.
HANDSET VOLUME
There are 8 Handset Volume settings available. The
Factory Default is “4”.
Lift the HANDSET. Dial tone will be heard. The LCD
display will show “HANDSET MODE”, and after a
few seconds, (8–10), the call timer will start:
HR : MIN DAY / MONTH
HANDSET MODE
00 - 01 -15
CALL
DURATION
TIME
Use the UP (5) or DOWN (6) key until the required
Handset Volume setting is obtained.
HR : MIN DAY / MONTH
HANDSET VOLUME: 5
Replace the HANDSET. The LCD display will show
the “On-hook” screen.
The Handset Volume will return to its default value
the next time the handset is lifted.
HEADSET VOLUME
There are 8 Headset Volume settings available. The
Factory Default is “5”.
Press the “HEADSET/DIAL” key. The “HEADSET/
DIAL” key LED will light and dial tone will be heard
in the headset. The display will show “HEADSET
MODE”, and after a few seconds, (8–10), the call
timer will start:
HR : MIN DAY / MONTH
HEADSET MODE
00 - 01 -15
CALL
DURATION
TIME
Use the UP (5) or DOWN (6) key until the required
Headset Volume setting is obtained.
HR : MIN DAY / MONTH
HEADSET VOLUME: 5
Press the “HEADSET/DIAL” KEY. The “HEADSET/
DIAL” key LED will go off and the display will show
the “On-hook” screen. The latest setting for the
headset volume will be retained for the next time the
telephone is used in headset mode.
The Headset Volume can be adjusted during a
“HEADSET telephone call.
Advanced Features
RECALL TYPE
The Berkshire 800 is set up for “Time Break Recall”
(TBR) as the Factory Default. If your PABX requires
the telephone to be set up for “Earth Leg Recall”
(ELR), carry out the following:With the telephone
“On-hook”.
Press the “MENU/ENTER” key. The LCD will display
“SET MEMORY”.
Press the UP (5) or DOWN (6) key until the display
shows “ADVANCED”.
Press the “MENU/ENTER” key, then press the
UP (5) or DOWN (6) key until the display shows
“RECALL TYPE: TBR”.
RECALL TYPE : TBR
Press the “MENU/ENTER” key again and the “TBR”