Eneo NXD-880F37P - Manual (Page 21)

21
EN
Access from the internet
Access from the internet once connected, the Network Camera is accessible on your local
network (LAN). To access the network camera from the Internet you must configure your
broadband router to allow incoming data traffic to the network camera. To do this, enable
the NAT-traversal feature, which will attempt to automatically configure the router to al-
low access to the network camera. This is enabled from Setup > System > Network > NAT.
For more information, please see “3.5.4 System>Network>NAT” of User’s Manual.
Setting the admin password over a secure connection
To gain access to the product, the password for the default administrator user must be
set. This is done in the “Admin Password” dialog, which is displayed when the network
camera is accessed for the setup at the first time. Enter your admin name and password,
set by the administrator.