Hardware installation, Further information – Eneo GXB-1710M/IR User Manual
Page 20
Advertising
![background image](/files/812351/content/doc020.png)
20
Hardware Installation
1. Plug in the power connection to the IP camera.
2. Plug in the IP camera cable.
3. Confirm the correct network connection status (PC/HUB/ IP camera).
4. In the PC IE Browser, key in the camera’s IP online to link up to the live
first page.
NOTE: The user can replace the desiccant pack depending on how often
the camera interior has been opened to the environment. Stick
and fix a desiccant pack to the inner side of the camera with a
two-side adhesive tape, then reattach the cover of the camera.
The Full Manual is available from the eneo web site at
www.eneo-security.com or from the CD supplied with this product.
Further information
Advertising