Electrolux EKC60752 - Manual (Page 30)

29
2. While the control lamp flashes
rapidly, set the area Timer setting
or for this cooking zone and the
desired time until the automatic
safety switch-off (for example 15
minutes).
The control lamp now flashes more slowly
and the remaining cooking time is shown
during the process in the display. If the
automatic switch-off is set for several
cooking zones, then it applies to the cooking
zone with the shortest remaining cooking
time. The control lamps light for the other
cooking zones with the set automatic switch-
off. To show the remaining cooking time for
one of these cooking zones, they must be
selected with the Timer area and the
associated control lamp flashes rapidly .
In order to set the remaining cooking time,
the desired cooking zone must be selected
with the Timer area . The associated
control lamp then flashes more rapidly.
Re-setting continues by setting or in
the Timer area.
When the set cooking time is reached, the
cooking zone is switched off automatically,
an acoustic signal sounds for two minutes
and the Timer display flashes .
3. Press the Timer area to turn off the
signal. For faster setting, press or
until the desired figure is reached
or If you press first on the Timer
setting area , the time setting
starts at 99 minutes.
If you press first on the Timer setting
area , the time setting starts at 1
minute.
~ 1 sec.