Eneo GLS-2302H User Manual
Page 33
Description of function keys:
DHCP
If you have a DHCP server running on your network and would like a dynamic IP address
to be updated to your Video Server automatically.
DNS
The Domain Name System is an Internet service that translates domain names into IP
addresses (e.g., 9.68.0.0).
The address can be obtained from your ISP or network gateway.
Enable UPnP
Presentation
Enable this setting to allow your Video Server to be configured as an UPnP device in your
network.
Enable UPnP port
forwarding
Enable this setting to allow the Video Server to add port forwarding entries into the router
automatically on a UPnP capable network.
• Change the Network Settings – PPPoE
The „Network” page has, on its upper left, the „PPPoE” icon.
Please follow the steps below to change the PPPoE settings through the network as necessary.
. Click on the
PPPoE button on the upper left menu to enter the „PPPoE Settings” page.
. Activate the „Enable” or „Disable” status of the PPPoE Settings function. Click your choices to enable.
. Enter the PPPoE „Username” and the PPPoE „Password”, then confirm the password again.
4. Click on the
Submit button to submit the new setting.
NOTE: Please refer to section 6.1.3.8 (PPPoE & DDNS) for more details.