Eneo GLS-2302H - Manual (Page 51)

5
Server settings:
() Click Add under the Sever column on Event Settings page to open the Server setting page. On this page, you
can specify where the notification has been sent when a trigger is activated. A total of 5 server settings can be
configured.
NOTE: The maximum server settings amount is five, however, you can set the Network storage or the
SD card for only one.
() Enter the Server Name for the server setting.
() Select the Server Type. There are four choices of server types available: Email, FTP, Network storage and
SD card. Select one of the server types.
Email: Select to send the media files via the email when a trigger is activated.
(a) Sender email address: Enter the email address of the sender.
(b) Recipient email address: Enter the email address of the recipient.
(c) Server address: Enter the domain or IP address of the email server.
(d) User name: Enter the user name of the email account if necessary.
(e) Password: Enter the password of the email account if necessary.
(f) Port: The default email server port is 5. You can also manually set another port.
(g) To verify if the email setting is correctly configured, click the Test button.
The result will be shown in above this setting page (TEST OK or TEST ERROR).
If successful, you will receive an email indicating the result.
(h) Click Submit to activate the setting.
FTP: Select to send the media files to an FTP server when a trigger is activated.
(a) Server address: Enter the domain or IP address of the FTP server.
(b) Port: The default FTP server port is . It can also be assigned to another port number.
(c) User name: Enter the login name of the FTP account.
(d) Password: Enter the password of the FTP account.
(e) Remote folder name: Enter the folder where the media file will be placed. If the folder name does
not exit, the Video Server will create one on the FTP server.
(f) Passive mode: Most firewalls do not accept new connections initiated from external requests.
If the FTP server supports passive mode, select this option to enable passive mode FTP and allow
data transmission to pass through the firewall.
(g) To verify if the FTP setting is correctly configured, click the Test button.
The result will be shown in above this setting page (TEST OK or TEST ERROR).
(h) Click Submit to activate the setting.
Network storage: Select to send the media files to a network storage location when a trigger is
activated. Please fill in the information for your server.
(a) Network storage location: Enter the network storage path (\\ server name or IP address\ folder name).
(b) Workgroup: Enter the workgroup name for the network storage server.
(c) User name: Enter the user name for the server.
(d) Password: Enter the password for the server.
(e) Primary WINS server:
(f) To verify if the storage setting is correctly configured, click the Test button.
The result will be shown in above this setting page (TEST OK or TEST ERROR).
(g) Click Submit to activate the setting.