Eneo GLS-2302H User Manual
Page 38
8
5. The Certification Information will show below.
6. Click „CSR Property” to see the Certificate Signing Request information.
7. Click „Certificate Property” to see the Certificate information.
8. Click „Remove” to remove the created certificate.
9. Click on the
Submit button to submit the new setting.
NOTE: The certificate cannot be removed while the HTTPS is still enabled. To remove the certificate you must
first uncheck Enable HTTPS secure connection.
Methods of creating and installing the certificate:
1. Create self-signed certificate automatically
Before using HTTPS for communication with the IP Video Server, a Create self-signed certificate automatically:
() Enable HTTPS secure connection.
() Select the „Create self-signed certificate automatically” option.
() Click the Create button.
(4) The new Certification Information will show in the third column on the HTTPS setting page.
(5) Click Home to return to the main page. Change the address from „http://” to „https://„ in the address bar and
press Enter on your keyboard. Some Security Alert dialogs will pop up. Click OK or Yes to enable HTTPS.
2. Create self-signed certificate manually
() Enable HTTPS secure connection.
() Click „Create self-signed certificate manually” to open the Create certificate column.
() Click the Create button.
(4) The new Certification Information will show in the third column on the HTTPS setting page.
3. Create certificate request and install
() Enable HTTPS secure connection.
() Click „Create self-signed certificate automatically” to open the Create certificate column.
() Click the Create button.
(4) If you see an Information bar, click OK and click on the Information bar at the top of the page to allow pop-ups.
(5) The pop-up windows will show a certificate request.
(6) Look for a trusted certificate authority that issues digital certificates. Enroll the Video Server. Wait for the
certificate authority to issue a SSL certificate; click „Browse...” to search for the issued certificate, then click
„Upload” on the Create certificate column.
(7) The new Certification Information will show in the third column on the HTTPS setting page.