Ensemble Designs 5385 Analog Composite to Digital Converter User Manual
Page 11
Avenue Touch Screen Remote Configuration
The Avenue Touch Screen remote control menus for this module are illustrated and
explained below. Refer to the 5385 Parameter Table for a summary of available parame-
ters that can be set remotely through the menus illustrated.
Parameter fields that are grayed out can indicate one of the following conditions:
•
An option is not installed.
•
The function is not active.
•
The module is locked.
•
The User Level set with Avenue PC is not accessible from the current User Level.
5385 Touch Screen Menus
The Config 1 menu shown below shows the configuration parameters available.
•
Blanking – use this control to set the blanking for Narrow (lines 1-9 are blanked
in NTSC, lines 1-6 in PAL) or Wide (lines 1-20 in NTSC, lines 1-22 in PAL).
•
Setup Removal – use this control to turn setup removal on or off depending on
the requirement of the input signal.
•
Comb Mode – set the comb mode for 3 Line (best for video with motion) or
5 Line decoding.
Status reporting is provided for the following conditions:
•
Input – reports the input status as No Input, 525 Lock, or 625 Lock.
5385-11
Model 5385 A-D Converter