Ensemble Designs 9670 Audio Automatic Gain and Loudness Control and 9690 Audio Compliance and Monitoring Software - Manual (Page 6)

www.ensembledesigns.com
Model 9690-6
Audio Compliance and Monitoring Software
Connecting to your Network
1. From the File menu, select Preference[s]. The Preference[s] window displays.
2. In the IP Address field, enter the IP address of the target Avenue Frame that you want to monitor
(for example, 192.168.000.094). Note that you can target any Avenue Frame on your network. As
long as you have successfully connected with an Avenue Frame, all Avenue Frames on the network
will be visible to Audio Compliance Monitor.
3. Click the Re-Open Net Connection button next to the IP Address field.
4. At the bottom of the Preferences window, click Done.
Preferences window before configuring