H3C Technologies H3C S12500 Series Switches - Manual (Page 449)

433
Task Remarks
Configuring the NEXT_HOP attribute Optional.
Configuring the AS_PATH attribute Optional.
Optimizing IPv6 MBGP networks
Configuring IPv6 MBGP soft reset Optional.
Enabling the IPv6 MBGP ORF capability Optional.
Configuring the maximum number of ECMP routes Optional.
Configuring a large scaled IPv6
MBGP network
Configuring an IPv6 MBGP peer group Optional.
Configuring IPv6 MBGP community Optional.
Configuring an IPv6 MBGP route reflector Optional.
Configuring basic IPv6 MBGP functions
Configuration prerequisites
IPv6 MBGP is an application of multiprotocol BGP. Before you configure IPv6 MBGP, complete the
following tasks:
• Enable IPv6.
• Configure network layer addresses for interfaces.
• Complete BGP basic configuration.
Configuring an IPv6 MBGP peer
To configure an IPv6 MBGP peer
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable BGP and enter BGP
view.
bgp as-number Not enabled by default.
3. Enter IPv6 address family
view.
ipv6-family N/A
4. Specify a IPv6 BGP peer and
its AS number.
peer ipv6-address as-number
as-number
Not configured by default.
5. Enter IPv6 MBGP address
family view.
ipv6-family multicast N/A
6. Enable the IPv6 MBGP peer. peer ipv6-address enable Not enabled by default.