Solution – H3C Technologies H3C S12500-X Series Switches User Manual
Page 115
Advertising
105
Solution
1.
Use display ip routing-table to verify that unicast routes to the C-RPs and the BSR are available on
each router and that a route is available between each C-RP and the BSR. Make sure each C-RP
has a unicast route to the BSR, the BSR has a unicast route to each C-RP, and each router on the
network has unicast routes to the C-RPs.
2.
Use display pim bsr-info to verify that the BSR information exists on each router, and then use
display pim rp-info to verify that the RP information is correct on each router.
3.
Use display pim neighbor to verify that PIM neighboring relationship has been correctly
established among the routers.
Advertising
This manual is related to the following products:
- H3C S9800 Series Switches H3C S5560 Series Switches H3C S5130 Series Switches H3C S5120 Series Switches H3C S12500 Series Switches H3C SR8800 H3C SR6600-X H3C SR6600 H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module