H3C Technologies H3C S10500 Series Switches - Manual (Page 208)

197
• Configure a packet matching rule for the service instance
• Create a Martini MPLS L2VPN connection for the service instance
After performing these configurations, packets arriving at the Layer 2 Ethernet interface and matching the
packet matching rule will be forwarded by the created MPLS L2VPN connection.
Follow these steps to create a Martini MPLS L2VPN connection for a service instance:
To do… Use the command… Remarks
Enter system view system-view —
Create a PW class template and
enter PW class template view
pw-class pw-class-name
Optional
By default, no PW class template is
created.
Specify the PW transport mode trans-mode { ethernet | vlan }
Optional
VLAN by default
Specify the tunneling policy pw-tunnel-policy policy-name
Optional
By default, the default tunneling
policy is used. The default
tunneling policy selects only one
tunnel in this order: LSP tunnel,
CR-LSP tunnel.
Return to system view quit —
Enter the view of the interface
connecting the CE interface interface-type
interface-number
—
Create a service instance and
enter service instance view
service-instance instance-id
Required
By default, no service instance is
created.
Configure a packet matching rule
for the service instance
encapsulation { s-vid { vlan-id }
[ only-tagged ] | port-based |
tagged | untagged }
Required
By default, no packet matching
rule is configured for the service
instance.
Create a Martini MPLS L2VPN
connection for the service instance
xconnect peer peer-ip-address
pw-id pw-id [ access-mode
{ ethernet | vlan } | mtu mtu-value
| [ pw-class class-name ] ] *
Required
After this command is executed,
the VLAN ID, access mode, and
MTU configured for the service
instance cannot be changed. To
modify these parameters, you must
use the undo xconnect peer
command to remove the L2VPN
connection first.
Display information about one or
all service instances configured on
the interface
display service-instance interface
interface-type interface-number
[ service-instance instance-id ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view