Configuring hovpn, Network requirements – H3C Technologies H3C S10500 Series Switches User Manual
Page 334
323
[CE3] ping 130.1.1.1
PING 130.1.1.1: 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
Request time out
--- 130.1.1.1 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss
Configuring HoVPN
Network requirements
There are two levels of networks, the backbone and the MPLS VPN networks, as shown in
•
SPEs act as PEs to allow MPLS VPNs to access the backbone.
•
UPEs act as PEs of the MPLS VPNs to allow end users to access the VPNs.
•
Performance requirements for the UPEs are lower than those for the SPEs.
•
SPEs advertise routes permitted by the routing policies to UPEs, permitting CE 1 and CE 3 in VPN
1 to communicate with each other and forbidding CE 2 and CE 4 in VPN 2 to communicate with
each other.