H3C Technologies H3C S7500E Series Switches - Manual (Page 24)

13
Figure 9 Installing the cage nuts (S7503E)
(1) Cage nut
NOTE:
When preparing for installation, make sure the total height of the switches to be installed is no higher than
the height of the rack.
Installing accessories to the chassis
Installing mounting brackets and cable management brackets
Before installing the switch to the rack, install the mounting brackets and cable management brackets
shipped with the switch. Mounting brackets are used for fixing the chassis to the rack, and cable
management brackets for cabling the switch.
• S7506E-V—Install the mounting brackets and cable management brackets separately to the chassis.
For more information, see "
Installing the cable management brackets on the S7506E-V " and
" Installing the mounting brackets ."