H3C Technologies H3C S7500E Series Switches - Manual (Page 98)

87
Replacing air filters on an S7506E-V
1. Use a Phillips screwdriver to remove the captive screws on the front and rear air filters, as shown
in callout 1 on Figure 53 .
2. Remove the front and rear air filters from the chassis, as shown in callout 2 on Figure 53 .
3. Install the cleaned front and rear air filters to the switch. For the installation procedures, see
"
Installing the switch ."
Figure 53 Replacing an air filter for S7506E-V
(1) Loosen the captive screws on the air filters with a screw driver (2) Remove the air filters from the chassis
Replacing an air filter for the other models
1. Loosen the captive screw on the air filter, as shown in callout 1 on Figure 54 .
2. Seize the captive screws on the air filter and slowly pull the air filter out of the chassis, as shown
in callout 2 on
Figure 54 .
3. Install the cleaned air filter to the switch. For the installation procedures, see " Installing the switch ."
1
1
2
1
1
2