H3C Technologies H3C S7500E Series Switches - Manual (Page 351)

11-22
z In general, since the route reflector forwards routing information between clients, it is not required
to make clients of a route reflector fully meshed. If clients are fully meshed, it is recommended to
disable route reflection between clients to reduce routing costs.
z If a cluster has multiple route reflectors, you need to specify the same cluster ID for these route
reflectors to avoid routing loops.
Displaying and Maintaining IPv6 BGP
Displaying BGP
To do… Use the command… Remarks
Display IPv6 BGP peer group
information
display bgp ipv6 group [ ipv6-group-name ]
Display IPv6 BGP advertised
routing information
display bgp ipv6 network
Display IPv6 BGP AS path
information
display bgp ipv6 paths [ as-regular-expression ]
Display IPv6 BGP peer/peer group
information
display bgp ipv6 peer [ group-name log-info |
ipv4-address verbose | ipv6-address { log-info |
verbose } | verbose ]
Display the prefix entries in the
ORF information of the specified
BGP peer
display bgp ipv6 peer { ip-address | ipv6-address }
received ipv6-prefix
Display IPv6 BGP routing table
information
display bgp ipv6 routing-table [ ipv6-address
prefix-length ]
Display IPv6 BGP routing
information matching an AS path
ACL
display bgp ipv6 routing-table as-path-acl
as-path-acl-number
Display IPv6 BGP routing
information with the specified
community attribute
display bgp ipv6 routing-table community
[ aa:nn<1-13> ] [ no-advertise | no-export |
no-export-subconfed ]* [ whole-match ]
Display IPv6 BGP routing
information matching an IPv6 BGP
community list
display bgp ipv6 routing-table community-list
{ basic-community-list-number [ whole-match ] |
adv-community-list-number }&<1-16>
Available in
any view