H3C Technologies H3C S3600 Series Switches - Manual (Page 928)

1-38
Figure 1-26 Generate a client key pair (4)
After a public key pair is generated, you need to upload the pubic key file to the server through FTP or
TFTP, and complete the server end configuration before you continue to configure the client.
# Establish a connection with the SSH server
2) Launch PuTTY.exe to enter the following interface.
Figure 1-27 SSH client configuration interface (1)
In the Host Name (or IP address) text box, enter the IP address of the server.
3) From the category on the left pane of the window, select SSH under Connection. The window as
shown in Figure 1-28 appears.