H3C Technologies H3C SR8800 - Manual (Page 21)

14
Step Command Remarks
2. Create a Layer 2 VE interface
and enter Layer 2 VE interface
view.
interface ve-bridge
interface-number
If the specified Layer 2 VE interface
already exists, you enter Layer 2
VE interface view directly.
You can create up to 1024 Layer 2
VE interfaces.
NOTE:
•
Due to the restriction of hardware resources, each VLAN can contain a maximum number of 64 Layer
2 VE interfaces on each card.
• For more information about the IPoEoA and EoA configuration, see Layer 2—WAN Configuration
Guide.
Displaying and maintaining an Ethernet interface or
subinterface
Task Command Remarks
Display Ethernet interface or
subinterface information.
display interface [ interface-type ] brief [ down ] [ |
{ begin | exclude | include } regular-expression ]
display interface interface-type { interface-number |
interface-number.subnumber } [ brief ] [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display traffic statistics for the
specified interfaces.
display counters { inbound | outbound } interface
[ interface-type ] [ | { begin | exclude | include }
regular-expression ]
Available in any view
Display traffic rate statistics
over the last sampling
interval. display counters rate { inbound | outbound }
interface [ interface-type ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the information about
a manual port group or all
manual port groups.
display port-group manual [ all | name
port-group-name ] [ | { begin | exclude | include }
regular-expression ]
Available in any view
Display Layer 2 VE interface
information.
display interface [ ve-bridge ] [ brief [ down ] ] [ |
{ begin | exclude | include } regular-expression ]
display interface ve-bridge interface-number [ brief ]
[ | { begin | exclude | include } regular-expression ]
Available in any view
Display Layer 3 VE interface
information.
display interface [ virtual-ethernet ] [ brief [ down ] ]
[ | { begin | exclude | include } regular-expression ]
display interface virtual-ethernet { interface-number
| interface-number.subnumber } [ brief ] [ | { begin |
exclude | include } regular-expression ]
Available in any view
Clear the interface or
subinterface statistics. reset counters interface [ interface-type
[ interface-number | interface-number.subnumber ] ]
Available in user view
Clear the Layer 2 VE interface
statistics. reset counters interface [ ve-bridge
[ interface-number ] ]
Available in user view