H3C Technologies H3C MSR 800 - Manual (Page 24)

17
Figure 19 Connecting a USB device
Connecting the console cable and setting terminal
parameters
Connecting the console cable
CAUTION:
When using a console cable to connect a PC to the router, first connect the DB-9 end of the console
cable to the PC serial port, and then connect the RJ-45 connector of the console cable to the router
console port.
To connect the console cable, as shown in Figure 20 :
1. Select a console terminal, which can be an ASCII terminal with an RS232 serial port or a PC.
(A PC is more commonly used.)
2. Connect the DB-9 connector (female) of the console cable to the RS-232 serial port of the
console terminal and the RJ-45 connector to the console port of the router.
Figure 20 Connecting the console cable