H3C Technologies H3C MSR 800 - Manual (Page 25)

18
Setting console terminal parameters
1. Select Start > All Programs > Accessories > Communications > HyperTerminal.
The Connection Description dialog box appears.
2. Enter the name of the new connection in the Name field and click OK.
Figure 21 Connection description
3. Select the serial port to be used from the Connect using list, and click OK.
Figure 22 Setting the serial port used by the HyperTerminal connection
4. Set Bits per second to 9600, Data bits to 8, Parity to None, Stop bits to 1, and Flow control to
None, and click OK.