H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 38)

29
Logging in to the wireless switch
Login methods
• Logging in through the console port
• Logging in through Telnet
• Logging in through the web interface
Logging in through the console port
To log in through the console port, prepare an 8-core shielded console
cable (with a crimped RJ-45 connector at one end and a DB-9 female
connector at the other end) and a console terminal (such as a laptop or
a PC).
Setting up the configuration environment
NOTE:
•
When you connect a PC to a powered-on wireless switch, connect the
DB-9 connector of the console cable to the PC before connecting the
RJ-45 connector to the wireless switch.
• When you disconnect a PC from a powered-on wireless switch,
disconnect the DB-9 connector of the console cable from the PC after
disconnecting the RJ-45 connector from the wireless switch.
To set up the configuration environment, plug the DB-9 female connector
to the serial port of the console terminal or PC, and connect the RJ-45
connector to the console port of the wireless switch.