Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 50

Advertising

Figure 9 Networking diagram for port isolation configuration

Configuration procedure

# Create isolation group 2.

<Device> system-view

[Device] port-isolate group 2

# Assign GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 to isolation
group 2 as isolated ports.

[Device] interface gigabitethernet 1/0/1

[Device-GigabitEthernet1/0/1] port-isolate enable group 2

[Device-GigabitEthernet1/0/1] quit

[Device] interface gigabitethernet 1/0/2

[Device-GigabitEthernet1/0/2] port-isolate enable group 2

[Device-GigabitEthernet1/0/2] quit

[Device] interface gigabitethernet 1/0/3

[Device-GigabitEthernet1/0/3] port-isolate enable group 2

# Display information of isolation group 2.

<Device> display port-isolate group 2

Port-isolate group information:

Uplink port support: NO

Group ID: 2

Group members:

GigabitEthernet1/0/1 GigabitEthernet1/0/2 GigabitEthernet1/0/3

Advertising