Configure 802.1x authentication, Configure mac authentication, Configure psk and mac authentication – H3C Technologies H3C WA2600 Series WLAN Access Points User Manual
Page 25
5-10
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter WLAN-BSS interface view
interface wlan-bss
interface-number
Required
Enable 11key negotiation
port-security tx-key-type 11key
Required
Not enabled by default.
Configure the key
port-security preshared-key
{ pass-phrase | raw-key } key
Required
Not configured by default.
Enable the PSK port security mode
port-security port-mode psk
Required
Configure 802.1X authentication
Follow these steps to configure 802.1X authentication:
To do…
Use the command…
Remarks
Enter system view.
system-view
—
Enter WLAN-BSS interface view
interface wlan-bss
interface-number
Required
Enable 11key negotiation
port-security tx-key-type 11key
Required
Not enabled by default.
Enable the 802.1X port security
mode.
port-security port-mode
userlogin-secure-ext
Required
Configure MAC authentication
Follow these steps to configure MAC authentication:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter WLAN-BSS interface view
interface wlan-bss interface-number
—
Enable MAC port security mode
port-security port-mode
mac-authentication
Required
802.11i does not support MAC authentication.
Configure PSK and MAC authentication
Follow these steps to configure PSK and MAC authentication:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter WLAN interface view
interface wlan-bss
interface-number
—