H3C Technologies H3C WA2600 Series WLAN Access Points - Manual (Page 38)

5-23
Figure 5-14 Configure the wireless card (III)
4) Verify the configuration.
z The client can pass 802.1X authentication and associate with the AP.
z You can use the display wlan client command, display connection command and display
dot1x command to view the online clients.
Dynamic WEP Encryption-802.1X Authentication Configuration Example
Network requirements
z As shown in Figure 5-15 , a fat AP with IP address 10.18.1.1 and a RADIUS server with IP address
10.18.1.88 are connected through a Layer 2 switch.
z It is required to perform dynamic WEP encryption.