H3C Technologies H3C Intelligent Management Center - Manual (Page 25)

16
When a device user logs in to manage a device, if the device user matches a condition, the device user
is controlled by the corresponding authorization command (shell profile and command set).
To display the page for configuring authorization policies, select User > Device User Policy >
Authorization Policies, as shown in Figure 14 . For more information, see " 7 Managing authorization
policies ."
Figure 14 Displaying the page for configuring authorization policies
Adding an LDAP server
Add an LDAP server on TAM, and then configure the parameters for logging in to the LDAP server. After
the LDAP server is created, TAM can read device user data from the LDAP server.
To display the page for configuring the LDAP server, click the User tab, and on the navigation tree, select
Device User Policy > LDAP Service > LDAP Servers, as shown in Figure 15 . For more information, see
" Managing LDAP servers ."