H3C Technologies H3C Intelligent Management Center - Manual (Page 32)

23
4 Performing device-related configuration
A device refers to a network device that is managed by users who log in. A device can cooperate with
TAM to implement TACACS+ authentication and authorization only when the device is added to TAM.
A device in TAM is an element in an authorization condition. To configure an authorization condition,
you must first add the device. For more information about authorization conditions, see "
5 Managing
authorization conditions ."
Different devices might use different command sets. Configure a command set for each device you add.
For more information about authorization command set, see " 6 Authorization command ."
Viewing the device list
To view the device list:
1. Click the User tab.
2. On the navigation tree, select Device User Policy > Device List.
The Device List displays all devices.
The list includes the following columns:
{
Device Name—Device label, which links to the device details page.
If the device is managed by the IMC Platform, this field is the same as the Device Label
parameter on the IMC Platform.
If the device is added to TAM manually, without being managed by the IMC Platform, this field
is empty.
{
Device IP—IP address.
If the device is managed by the IMC Platform, this field displays the management IP address of
the device.
If the device is added to TAM manually, without being managed by the IMC Platform, this field
displays the IP address manually entered.
{
Device Model—Device vendor and model.
If the device is managed by the IMC Platform, this field is the same as the Device Model
parameter on the IMC Platform.
If the device is added to TAM manually without being managed by the IMC Platform, this field
is empty.
{
Device Area—Area to which a device belongs.
One device can belong to multiple areas, which are separated by colons (;).
Device area is an important part of an authorization condition. For more information, see
"
Managing device areas ."
{
Device Type—Device type.
One device can belong to only one type.
Device type is an important part of an authorization condition. For more information, see
"
Managing device types ."