The module – Grass Valley 2010RDA-16 User Manual
Page 19
2010RDA-16 Instruction Manual
19
Remote Monitoring
Input Status Output Mode Page
The Input Status Output Mode
page (
) provides the following
status reporting items for the module:
•
Mode
indicates whether the on-board jumper is configured for
Single
, or
Dual
Local Onboard Module Configuration
•
Rear Module Status
reports
that the Coax passive rear module (
PRM-Coax
)
is installed.
•
Channel Lock
indicates whether each channel is
Locked
(valid AES signal
is present and module is locked to it) or
Unlocked
(module does not
detect a valid AES signal).
•
Sample Rate
indicates the current input sample rate being detected by
each channel as one of the following:
Out of Range, 32K
,
44.1K
,
48K
,
or
96K
.
Figure 11. 2010RDA-16 Input Status/Output Mode Display
Use
this
link