Grass Valley 2030RDA - Manual (Page 9)

2030RDA Instruction Manual 9
Installation
Figure 2. 2000T1 Frame, Rear Slot
2. Install the CoaxPRM passive rear module by inserting it into any rear
slot of the frame as illustrated in
Figure 3 .
Figure 3. Installing Passive Rear Module
3. Verify that the module connector seats properly against the midplane.
4. Secure the module to the rear of the frame with the two screw locks on
either side of the back panel using a crossblade screwdriver.
8031_12
Media section
rear slots 1-2
(with one 2000EMI blank)
J101
1
2
3
4
J102
Media section
rear slots 3-4
Network
and reference
input connections
Power connections
Alignment post
and receptacle Screw lock
(both sides)
8026_05
2000 frame (rear view) Board edge guides
(both sides)
J10 J9 SIG J8 J7 J6 J5 J4 J3 J2
IN COAX
PRM
J1