Grass Valley 8900GEN-SM - Manual (Page 45)

8900GEN-SM — Instruction Manual 45
8900GEN-SM Applications
Configure GeckoFlex Module to Verify 1080i Ref Bus 2
1. Connect an SDI video signal with an HD frame rate of 1080i 59.94 to the
video input (J10) of the corresponding rear module for the GeckoFlex
module you are using to verify the 1080i reference. This example uses
an 8985FS module in slot 8.
2. Locate this module in the frame using your web browser and click on
the System Config web page link.
3. On the System Config web page ( Figure 20 on page 46 ), set the Input
type to HD 59.94 and the Input Rate to 1080i/59.94 .
4. Set Ref Bus 2 to be both the Primary and Secondary Output Timing
sources.
5. Verify that Ref Bus 2 reports Present and Locked in the Status and Genlock
column.
6. Verify that the Input Video reports Present .
7. Verify that the Output Timing Source reported in the System Config
web page header reports
Ref Bus 2 .