Grass Valley 8921DAC - Manual (Page 22)

22 8921DAC Instruction Manual
Configuration
Set Output Processing Modes
Two rotary switches are provided on the front edge of the module for
setting the desired output processing mode for Channel 1/2
(AA 1/2 – SW1) and Channel 3/4 (AA 3/4 – SW2). Refer to
Output Pro-
cessing Modes on page 15 for an overview of each mode.
Table 5. AA 1/2 and AA 3/4 Mode Switch Settings
Position Channel 1 Processing Mode Channel 2 Processing Mode
0 1, 2 (Pass) 3, 4 (Pass)
1 –1, – 2 –3, – 4
2 – 1, 2 – 3, 4
3 1, – 2 3, – 4
4 1 + 2 (– 6 dB) 3 + 4 (– 6 dB)
5 1 + 2, 1 – 2 (MS D/E) 3 + 4, 3 – 4 (MS D/E)
6 – (1 + 2) – (3 + 4)
7 1 kHz 1 kHz
8 400 Hz 400 Hz
9 Silence Silence
A 1 + 2, 3 3, 4
B 1 + 2, 4 3. 4
C 1, 2 3, 4
D 1, 2 3, 4
E 1/2 ID 3/4 ID
F 1, 2 3, 4