Grass Valley 8921DAC User Manual
Page 36
36
8921DAC Instruction Manual
Configuration
To load a saved file from a location outside of the frame
1.
Select the
Load from ...
button under File Operations.
This will bring up the Load Current Config page (
2.
Browse to the location of the file you wish to load and select the file.
Select the
Open
button to load the file or enter the filename and path in
the Enter filename box.
3.
Once the correct path and filename is loaded, select the
Load
button on
the Load E-MEM page.
4.
This will place the recalled configuration from the file into a module
register.
5.
Select
Recall
to apply the new settings.
Figure 18. Load Current Config Page
Recall Defaults
Default settings for the module can be recalled by selecting the
Recall
Defaults
button. The defaults will revert to the settings given in the Default
column in
.