Introduction, Module features – Grass Valley 8935CF User Manual
Page 9
8935CF — Instruction Manual
9
8935CF 4 Channel Electrical to
Fiber Converter Module
Introduction
This manual covers installation, configuration, and operation of the 8935CF
4 Channel Electrical to Fiber Converter module.
Module Features
The 8935CF module is a four channel electrical to optical converter (dual
transmitter) with both electrical and fiber optic outputs. The module can
accommodate a variety of high definition video inputs as well as DVB/ASI,
AES, and GVG audio TDM interfaces.
The following features are available with this module:
•
Two module set including a hot-swappable front and rear module and
up to two single mode SFP dual transmitter fiber optic submodules
mounted on the front module.
•
Up to ten 8935CF modules in the same 2 RU GeckoFlex frame.
•
Four electrical BNC inputs to up to four fiber optic outputs and an iden-
tical electrical BNC output for each channel.
•
Re-clocking for stable long distance signals or re-clocking bypass for
non-SDI signals.
•
Supports both HD or SD formats and passes embedded audio present
in the incoming video stream.
•
CWDM (Coarse Wavelength Division Multiplexing) capability when
combined with 8939FCA Passive CWDM Optical Mux/Demux
modules and 8935FC 4 Channel Fiber to Electrical Converter modules
and other fiber-ready modules.
•
SNMP and product health monitoring is supported through the
8900NET module with applications such as NetCentral.
•
Software updating using the NetConfig Networking application.