Low battery power alert, Setting the display language, Setting the ring sound – Ericsson A1228LX User Manual

Page 21: Swering calls, W battery power alert, Ng the display language, Not for commercial use – ericsson inc

Advertising
background image

Not for commercial use – Ericsson Inc.

18

Basic Operations

•To increase the ear volume
during a call, press the upper
key on the side of your
phone.

•To decrease the ear volume
during a call, press the lower
key on the side of your
phone.

Low Battery Power Alert

The low battery alert sounds when your battery is reach-
ing its lowest operational power level. The words Low
Battery!

will appear in the display. When this hap-

pens, leave your phone turned on. The phone discharges
the battery and then automatically turns off. Charge the
battery within 24 hours after a complete discharge so
that the battery can charge to full capacity.

Setting the Display Language

You can set the language used to display the menus for
your mobile phone. To change the display language:

 Press

MENU

from the Standby screen to access the main

menu.

 Press 4 to display the SETTINGS menu.

 Press 9 to display the Language submenu.
 Press the  or repeatedly until the appropriate lan-

guage option is highlighted. The language options are
English, French, Spanish, Portuguese, Hebrew, or
Russian (languages may vary by region).

 Press

YES

to select the Language.

 Press

NO

to return to the previous screen or press

CLR

to return to the Standby screen.

Note!

If you accidentally select the wrong language, press

MENU 4 9

and scroll to the correct language.

Setting the Ring Sound

To select the ring sound for your mobile phone:

 Press

MENU

from the Standby screen to access the main

menu.

 Press 4 to display the SETTINGS Menu.
 Press 1 to display the Sounds submenu.
 Press 3 to display the Ring Sound submenu.
 Press the  or repeatedly until the appropriate ring

sound is highlighted. You will hear two ring cycles of
the currently selected ring sound as you scroll through
the list of ring sounds.

 Press

YES

to select the Ring Sound.

 Press

NO

to return to the previous screen or press

CLR

to return to the Standby screen.

Advertising