Grass Valley Aurora Ingest v.6.3 - Manual (Page 34)

34 Aurora Ingest System Guide September 2007
Chapter 2 Installing and Configuring Aurora Ingest
on page 35 .
11. Click Connect .
12. If you are using Encore, SMS7000 or Jupiter, you can also enable RS-422
switching. This feature enables you to switch between VTRs for each channel
without having to swap the RS-422 cables manually, as Aurora Ingest will switch
the RS-422 port. Aurora Ingest switches video from the VTR to the video capture
card whether RS-422 switching is enabled or not. For more information on RS-422
switching, see
“About RS-422 switching” on page 39 .
13. Select 0 (zero) for the video level if video is the first level in your router control
system, 1 if it is the second level and so on. Select the level from the dropdown list.
14. Click Apply to save changes.
15. Click the Configure Router Sources button. Aurora Ingest connects to the router and
queries the list of sources. The Configure Router Sources dialog box displays,
showing the available sources.
Jupiter Router