Grass Valley 3e Student CameraMan - Manual (Page 21)

Configure Your Student System
CameraMan 1-CCD and 3-CCD Student Camera System Installation and Operations Manual 15
FIGURE 3.2 DIP Switch Configuration
SET/ NO RETURN (DIP Switch 1):
• DOWN (and all microphone inputs are inactive) -
The camera will return to a default preset (preset
# 72), which is usually set to be a wide shot of
the room.
• UP (and all microphone inputs are inactive) - The
camera will remain positioned at the last active
input.
RETURN TIME/ SETTING (DIP Switches 2,3):
• Switches 2 and 3 only apply if Switch 1 is set to
DOWN. They select the time delay associated
with the camera returning to the default preset
after the last active microphone is released.
• Use this chart to set the switches accordingly:
Switch 1 Switch 2 Switch 3 Time Delay
DOWN DOWN DOWN No Delay
DOWN UP DOWN 5 Second
DOWN DOWN UP 10 Second
DOWN UP UP 15 Second