Grass Valley CONTROL Center CameraMan Rev.B - Manual (Page 43)

Page 40 Installation and Operations Manual
Setting Camera Video Parameters
Shading Menu
Display Path: MENU > CAMERA ADJUST > MORE > MORE > MORE > MORE > SHADE
The Shading menu is used to compensate for uneven color shading throughout the screen.
In most situations, this should be set to OFF.
• UP and DOWN: Used to adjust the level of shading.
• Default:
OFF.
H. Phase Menu
Display Path: MENU > CAMERA ADJUST > MORE > MORE > MORE > MORE > MORE > H.
PHASE
When an external reference sync signal is connected to the GEN LOCK connector on the back
of the camera, the camera operates at the frequency of that reference signal. The Horizontal
Phase function can be used to perfectly synchronize the horizontal phase of the camera with
the horizontal phase of the reference signal.
• UP: Used to increase the Horizontal Phase.
• DOWN: Used to decrease the Horizontal Phase.
• RANGE:-99 to +99.
• Default:
0.
If there is not an external sync signal connected, this setting adjustment has no effect.
SC Phase Menu
Display Path: MENU > CAMERA ADJUST > MORE > MORE > MORE > MORE > MORE > SC
FINE
When gen locking the camera, use this function for fine adjustments to the Sub-Carrier Phase.
Refer to your 3-CCD Camera Installation and Operations Manual for information on how to
make coarse adjustments to the Sub-Carrier Phase.
If there is not an external sync signal connected, this setting adjustment has no effect.
Shading Menu
Camera Adjust Menu 5
Horizontal Phase Menu
SC Phase Fine Menu