Grass Valley EDIUS 5 - Manual (Page 48)


Confirmation after installation
Confirming resource (in Windows Vista)
Confirm whether driver has been normally installed after restarting when driver and
application software installation is finished.
1
Proceed to [System and Maintenance] from [Control Panel]
of [Start] menu.
Or right click [Computer] of [Start] menu and select
[Properties].
2
Click [Device Manager].
3
Double click [Sound, video and game controllers].
* This screenshot is of EDIUS SP-SDI.
4
Confirm the device names.
[HX-E1] (EDIUS SP)
[HX-E2] (EDIUS SP-SDI)
[RX-E1] (EDIUS HD / SD)
[AVC-C1] (AVC-Intra)
If you find ! or X mark at the top of device name, that means you failed installing HX-
E1 / E2, RX-E1, AVC-C1 driver.
Try installation again, check rival resource, or change board insertion position.
5
Close [Device Manager].
Checking the driver for the main board now finishes.
6
Start up EDIUS or ADVC Mode Controller and exit once.
•
•
•
•