Grass Valley iControl Solo - Manual (Page 25)

iControl Solo
User Guide
21
To add a card to the reference configuration:
• In the Navigator window, right-click the card you wish to add, and then click Add to reference
configuration on the shortcut menu.
The phrase
In Ref. Configuration
appears in the Config status column.
Removing Cards from the Reference Configuration
To remove a card from a reference configuration:
• In the Navigator window, right-click the card you wish to remove, and then click Remove from
reference configuration.
The phrase
Not In Ref. Configuration appears in the Config Status column.
Note: If this card is physically removed from its slot, the card name remains in the Label column,
along with the phrase
Missing from slot
.