Installing a single imaging frame, Installing multiple imaging frames – Grass Valley iControl Solo User Manual
Page 29
iControl Solo
User Guide
25
To determine the COM port number associated with IC-USB:
1. On the Start menu, point to Programs, then to Inside Out Networks, and click Edgeport
Configuration Utility.
2. Expand the Edgeport 1i line item from the General Tab.
The COM port number is specified in brackets.
Installing a Single Imaging Frame
Ensure that the frame is properly terminated (refer to the Installation Guide for your Quartet 2 or
Symphonie frame).
Installing Multiple Imaging Frames
A maximum of 4 Imaging frames (Quartet 2 and Symphonie) can be daisy-chained together. Each
individual frame in the daisy chain requires a different serial identification assignment. The last frame in
the chain must be terminated (refer to the Installation Guide for your Quartet 2 or Symphonie frame).